Skip to Content
  1. All products
  2. Strength Testing
  3. Universal Strength Machine Digital VUD III 120 V
  4. Strength Testing
Pricelist: 0 price Pricelist
Pricelist: 0 price Pricelist
Universal Strength Machine Digital VUD III 120 V

Universal Strength Machine Digital VUD III 120 V

Universal Strength Machine  

1.0 Product Information:  

1.1 General Information 

Universal Strength Machine is equipped with a loading mechanism and sensing mechanism which are controlled by PLC and observed on screen touch HMI. By default it can measure Compression strength of an AFS (Dia. 2”X2”) or Metric (Dia. 50mmX50mm) Specimen.  

With Help of attachment it can also measure 

  • High Compression Strength (Refer 4.2.1) 

  • Shear Strength (Refer 4.2.2) 

  • Splitting Strength (Refer 4.2.3). 

  • Tensile Strength (Refer 4.2.4). 

  • Transverse Strength (Refer 4.2.5). 

  • Twin Transverse Strength (Refer 4.2.6). 

  • Deformation (Refer 4.2.7). 

1.2 General Usage 

Keep the specimen in between compression pads or accessory & press of start button, within few seconds the equipment shows the reading. 

1.3 Product Data 

Product Name: 

Universal Strength Machine 

Product Code: 

VUD III 

Order Reference Code: 

V0000108 

Electrical Supply Required: 

230v 50Hz A.C. (Default) 

110v 60 Hz A.C (Optional) 

Single Phase, Stabilized with Over/ Under Voltage cut-off. 

Electrical Plug: 

M type : 15 Amp Plug 

Typical Maximum Current: 

1.5 A at 230V 

Compressed air Supply: 

Not Required 

Communication: 

  • Ethernet (RJ45) 

  • CloudSync using V-Sync 

Dimensions: 

545 X 320 X 610 mm (WXBXH) 

Packing Dimensions: 

650 mmx 420mm x 760 mm (WXBXH) Typical 

Net Weight:  

Approximately 46 kg 

Gross Weight: 

Approximately 56 kg 

Colour: 

Factory Default 

Measuring Range: 

Direct Load: 300 Kg 

Compression: 15 Kg/cm2 

Shear/Splitting: 12 Kg/cm2 

Tensile : 60 Kg/cm2 

Transverse: 600 Kg/cm2 

Deformation: 10mm 

Traceable to:  

NABL Standards 

Least Count: 

Direct Load: 0.1 Kg 

Compression: 0.05 Kg/cm2 

Shear/Splitting: 0.05 Kg/cm2 

Tensile : 0.05 Kg/cm2 

Transverse: 1 Kg/cm2 

Twin Transverse: 0.05 Kg/cm2 

Deformation: 0.01 mm 

Specimen Requirements: 

Required 

Operating Temperature: 

0-500C 

Testing Standards: 

BIS/AFS 

Calibration Frequency: 

22500 nos. of Testing Cycles or Once in Year 

 

2.0 Scope of Supply 

2.1 Inclusions in Supply Scope 

  • Universal Strength Machine. 

  • Compression pad set.  

  • Calibration certificate. 

  • Instruction manual. 

 

2.2 Exclusions in Supply Scope 

  • Data interfacing accessories.  

  • Anything that is not covered under Supply scope. 

 

3.0 Recommended Pre-requisite Equipment  

Sand Splitter : To get representative sample  

Specimen preparation equipment’s to make a standard AFS or Metric specimen. 

4.0 Accessories 

4.1 Calibration Kits 

There are two types of calibration kits to choose from: 

VKSL: For Low Strength 

VKSH: For High Strength 

4.2 Attachments 

  1. VUHD: High Dry Strength Attachment  

  2. VHS: Shear Strength Attachment 

  3. VSA: Splitting Strength Attachment 

  4. VAS: Tensile Strength Attachment 

  5. VTS: Transverse Strength Attachment 

  6. VTT: Twin Transverse Shear Attachment 

  7. VDSD: Deformation Attachment 

5.0 Alternative Equipment 

  1. Universal Strength Machine VUD  

  2. Universal Strength Machine Hydraulic VUN (For Educational Purposes)  

  3. Universal Strength Machine VUM 

6.0 Installations Instructions 

Required Levelled (2mm) and sturdy platform. (Equipment should be away from external source of vibration or electromagnetic interference.) Other Installation instruction shall be provided along with the equipment. 

7.0 Consumables 

NA 

8.0 Hazards 

Squeezing Hazard: Do not insert hand or limb in between the pads when in operation. 

9.0 Additional Information 

Link to Web-Page   

Link to Video of Demo  

 

Disclaimer: Specifications and design of equipment may change without prior notice. 

or email our sales team
₹ 0.000 ₹ 0.000
₹ 1.000

Add to cart
Contact Us