1.1 General Information
Sand shooter is consists of pair of controlled heated plates, range up to 3000C, dumbbell shape split tensile core box with handle. Sand shooting arrangement, suitable for hotbox sand & Resin coated sand.
1.2 General Usage
Sand shooter has been designed as a complete unit for prepare the specimen from hot box sand & resin coated sand. Prepared specimen use to check the tensile strength of sand.
1.3 Product Data
Product Name:
Sand Shooter
Product Code:
VSS
Order Reference Code:
V0000045
Electrical Supply Required:
230v 50Hz A.C. (Default)
110v 60 Hz A.C (Optional)
Single Phase, Stabilized with Over/ Under Voltage cut-off.
Electrical Plug:
M type : 15 Amp Plug
Typical Maximum Current:
6.2 A at 230V
Compressed air Supply:
5 Kg/cm2 Dry Air
Communication:
Not Applicable
Dimensions:
400x440x780mm (WXBXH)
Packing Dimensions:
510x560x1000mm (WXBXH) Typical
Net Weight:
Approximately 46 kg
Gross Weight:
Approximately 56 kg
Colour:
Factory Default
Measuring Range:
One Specimen
Traceable to:
Manufacturers Standards
Least Count:
Specimen Requirements:
Not Required
Operating Temperature:
0-500C
Testing Standards:
BIS: Standard
AFS: Optional
Calibration Frequency:
11500 nos. of Testing Cycles or Once in Year
2.0 Scope of Supply
2.1 Inclusions in Supply Scope
Sand shooter.
Tensile core box with handle.
Accessories shell sand.
Assy inner tube.
Assy outer tube.
Hand gloves set.
Calibration certificate.
Instruction manual.
2.2 Exclusions in Supply Scope
Anything that is not covered under Supply scope.
3.0 Recommended Pre-requisite Equipment
Sand Splitter : To get representative sample
Sand sample preparation equipment to make a standard sand sample.
4.0 Accessories
4.1 Calibration Kits
VKHC: For Temperature
4.2 Attachments
NA
5.0 Alternative Equipment
Universal Sand Shooter Model VUS
6.0 Installations Instructions
Required Levelled (2mm) and sturdy platform. (Equipment should be away from external source of vibration or electromagnetic interference.)
Other installation instruction shall be provided along with the equipment.
7.0 Consumables
8.0 Hazards
Burning Hazard: Heater temperature 230oC. Don’t touch to heaters.
Squeezing Hazard: Do not insert hand or limb under the tube when in operation.
9.0 Additional Information
Link to Web-Page
Disclaimer: Specifications and design of equipment may change without prior notice.
For Sand Shooter VSS. We will reply with pricing and lead time.
