Permeability Meter
1.0 Product Information:
1.1 General Information
This equipment to measure Permeability of Foundry Sands. By default it can measure absolute permeability of an AFS (Dia. 2”X2”) or Metric (Dia. 50mmX50mm) Specimen.
With Help of attachment it can also measure
Relative Permeability of Moulds (Refer 4.2.1)
Absolute Permeability of Cores (Refer 4.2.2)
Absolute Permeability of Un-bonded sand (Refer 4.2.3).
1.2 General Usage
Specimen held in a Tube or accessory is placed on the measuring Rubber Boss. Conduct the test cycle & read the permeability reading on AFS chart.
1.3 Product Data
Product Name:
Product Code:
VP
Order Reference Code:
V0000025
Electrical Supply Required:
Not Required
Electrical Plug:
Not Applicable
Typical Maximum Current:
Compressed air Supply:
Communication:
Dimensions:
290 X 275 X 420 mm (WXBXH)
Packing Dimensions:
400 mmx 400mm x 685 mm (WXBXH) Typical
Net Weight:
Approximately 15 kg
Gross Weight:
Approximately 20 kg
Colour:
Factory Default
Measuring Range:
0-100 mmWC and Related permeability readings displayed on AFS chart.
Traceable to:
Manufacturers Standards
Least Count:
1 mmWC
Specimen Requirements:
Compression type specimen
Operating Temperature:
0-500C
Testing Standards:
BIS: Standard
AFS: Optional
Calibration Frequency:
22500 nos. of Testing Cycles or Once in Year
2.0 Scope of Supply
2.1 Inclusions in Supply Scope
Permeability Meter.
Large Orifice.
Syphon Pump.
Calibration certificate.
Instruction manual.
2.2 Exclusions in Supply Scope
Precision small orifice. (Part # V4500256)
Anything that is not covered under Supply scope.
3.0 Recommended Pre-requisite Equipment
Sand Splitter : To get representative sample
Specimen preparation equipment to make a standard AFS or Metric Compression specimen.
4.0 Accessories
4.1 Calibration Kits
There are four types of calibration kits to choose from:
VKPA: With Std. Specimen type for Small Orifice
VKPB: With Std. Specimen type for Large Orifice
VKPC: With Rubber Boss type for Small Orifice
VKPD: With Rubber Boss type for Large Orifice
4.2 Attachments
VPR: Mould Perm Tester
VD: Core Permeability Tube
VBP: Base Permeability Tube
Small Orifice
5.0 Alternative Equipment
Digital Permeability Meter VPD
Electropermeability Meter VEP
VCAT Multi Tester
6.0 Installations Instructions
Required Levelled (2mm) and sturdy platform. (Equipment should be away from external source of vibration) Other Installation instruction shall be provided along with the equipment.
7.0 Consumables
Demineralized Water
Rubber Boss Assembly (Part # V4500259)
8.0 Hazards
No Major Hazards.
9.0 Additional Information
Link to Web-Page
Link to Video Demo
Disclaimer: Specifications and design of equipment may change without prior notice.
For Permeability Meter VP. We will reply with pricing and lead time.
