1.1 General Information
Peel back tester digital is equipped with an electronically controlled dimpled plate with digital temperature indicator, funnel, two trays, and handle to turn heating plate.
1.2 General Usage
Peel back tester digital is used for finding the percentage of the plastic semi cured subsurface layer of shell sand, which peels away.
1.3 Product Data
Product Name:
Peel Back Tester Digital
Product Code:
VBTD
Order Reference Code:
V0000056
Electrical Supply Required:
230v 50Hz A.C. (Default)
110v 60 Hz A.C (Optional)
Single Phase, Stabilized with Over/ Under Voltage cut-off.
Electrical Plug:
M type : 15 Amp Plug
Typical Maximum Current:
9.0 A at 230V
Compressed air Supply:
Not Required
Communication:
Not Applicable
Dimensions:
460x315x530 mm (WXBXH)
Packing Dimensions:
610x450x625 mm (WXBXH) Typical
Net Weight:
Approximately 24 kg
Gross Weight:
Approximately 31 kg
Colour:
Factory Default
Measuring Range:
Traceable to:
Manufacturers Standards
Least Count:
Specimen Requirements:
Operating Temperature:
0-500C
Testing Standards:
BIS: Standard
AFS: Optional
Calibration Frequency:
12500 nos. of Testing Cycles or Once in Year
2.0 Scope of Supply
2.1 Inclusions in Supply Scope
Peel Back Tester Digital.
Tray – 02 nos.
Spatula flat.
Assy funnel.
Calibration certificate.
Instruction manual.
2.2 Exclusions in Supply Scope
Anything that is not covered under Supply scope.
3.0 Recommended Pre-requisite Equipment
Sand Splitter : To get representative sample
Hot Air Blower Mixer VHA
Digital weighing scale.
Stop watch.
Vernier calliper.
4.0 Accessories
4.1 Calibration Kits
VKHC: For Temperature
4.2 Attachments
NA
5.0 Alternative Equipment
Peel Back Tester VBT
6.0 Installations Instructions
Required Levelled (2mm) and sturdy platform. (Equipment should be away from external source of vibration or electromagnetic interference.) Other Installation instruction shall be provided along with the equipment.
7.0 Consumables
8.0 Hazards
Burning Hazard: Heater temperature 230oC. Don’t touch to hot plates.
9.0 Additional Information
Link to Web-Page
Link to Video of Demo
Disclaimer: Specifications and design of equipment may change without prior notice.
