Sand Rammer is equipped with a lifting & ramming cam mechanism, calibrated sliding weight, Pedestal cup and standard specimen tube. To prepare the standard 50mm X 50mm specimen
With Help of attachment it can also measure
Compactibility (Refer 4.2.1)
Flowability (Refer 4.2.2)
Sand Rammer is used to prepare the standard specimen under identical conditions for checking important physical properties of foundry sand.
Product Name:
Sand Rammer
Product Code:
VR
Order Reference Code:
V0000001
Electrical Supply Required:
Not Required
Electrical Plug:
Not Applicable
Typical Maximum Current:
Compressed air Supply:
Communication:
Dimensions:
245 X 225 X 560 mm (WXBXH)
Packing Dimensions:
400 mmx 400mm x 685 mm (WXBXH) Typical
Net Weight:
Approximately 22 kg
Gross Weight:
Approximately 27 kg
Colour:
Factory Default
Measuring Range:
50 mm Specimen
Traceable to:
NABL Standards
Least Count:
1 mm
Specimen Requirements:
Operating Temperature:
0-500C
Testing Standards:
BIS: Standard
AFS: Optional
Calibration Frequency:
22500 nos. of Testing Cycles or Once in Year
Sand Rammer.
Standard Specimen Tube.
Pedestal Cup.
Stripper.
Calibration certificate.
Instruction manual.
Anything that is not covered under Supply scope.
Sand Splitter : To get representative sample
Tube Filler Accessory VTF
Rammer Base Block VRB
Weighing Balance (LC 10mg)
There are two types of calibration kits to choose from:
VKRA: With Std. Specimen Tube Type
VKRB: With Impact Ring Type
Compactibility Tester VCT
Flowability Meter VF
Sand Squeezer VCC
Digital Compactibility Tester VCCD
Required Levelled (2mm) and sturdy platform. (Equipment should be away from external source of vibration) Other Installation instruction shall be provided along with the equipment.
NA.
Squeezing Hazard
Link to Web-Page
Disclaimer: Specifications and design of equipment may change without prior notice.
